Recently Added Macros


1-10 of 50 for "Recently Added Macros" Results per page:
< 12345 >
Save As eDrawings (All Configurations-Sheets)
Downloads: 27

(TBD)
Contributed on: 7/4/2014
Description: Macro to save active document as eDrawings with all configurations/sheets in the same file depending on the type of active document. The file name will be same as the active document and eDrawings will be saved in the same location as the active document.
By: Deepak Gupta
Company: http://gupta9665.com/
Category: Other 
Tags:
all  assembly  configurations  drawing  edrawings  part  sheets 
Rebuild - Isometric - Save
Downloads: 25

(TBD)
Contributed on: 6/24/2014
Description: Original Request: Could someone make a macro for me that just rebuilds the currently open part then displays it as the standard isometric view then saves. Thank you :)
By: Jared Sheetz
Company: Ultradent Products Inc
Category: Parts 
Create configurations for upper and lower tolerances
Downloads: 64

(TBD)
Contributed on: 4/25/2014
Description: Each configuration will not have any tolerances. In one configuration all dimensions will be set to nominal value plus lower tolerance (which is usually negative). In the other configuration all dimensions will be set to nominal value plus upper tolerance (usually positive)
By: adam bridgman
Company: javelin technologies
Category: Assemblies 
Tags:
adam  bridgman  tolerance 
Macro che imposta e rimuove l'attributo di Sola Lettura dei files caricati
Downloads: 42

(TBD)
Contributed on: 3/25/2014
Description: Macro di Fabrizio che imposta e rimuove l'attributo di Sola Lettura dei files caricati
By: fabrizio todaro
Company: dalmaschio group
Category: Assemblies 
Tags:
macro  solidworks  vba 
Ballooning semi-automatique
Downloads: 52

(TBD)
Contributed on: 2/22/2014
Description: Petit outil qui permet de poser des annotations avec un cerclage. Le numéro s'incrémente à chaque fois que vous cliquez sur un emplacement. Le bouton "Nouvelle vue" permet de passer à la dizaine supérieure. C'est une manière de limiter les manipulations en cas d'oubli ou d'erreur.
By: Denis MESSAGER
Company: JPB-systeme
Category: Drawings 
Tags:
ballooning  plan 
Save Drawings as PDF
Downloads: 560

(2 Ratings)
Contributed on: 1/13/2014
Description: Drawings as saved, a PDF is also created using current output settings in the same location as the drawing.
By: adam bridgman
Company: javelin technologies
Category: Other 
Tags:
drawing  pdf  save 
Link Note to Property
Downloads: 394

(2 Ratings)
Contributed on: 11/22/2013
Description: A note can be linked to any property (including body specific properties and cut list properties). This macro will link the value of that note to a custom property (it pushes the value of the note to the property, never the other way around)
By: adam bridgman
Company: javelin technologies
Category: Parts 
Tags:
custom  cut  cutlist  javelin  list  note  property  rebuild  update 
Close Read-only Files
Downloads: 73

(1 Ratings)
Contributed on: 10/16/2013
Description: Close all read-only documents and decide whether or not to close documents with unsaved changes with a single dialog. The normal SolidWorks behaviour is to ask for each document in succession, this could lead to clicking don't save on a file that does require a save.
By: adam bridgman
Company: javelin technologies
Category: Other 
Tags:
close  document  documents  only  pdm  read  save 
MM_SW_VIEW_2_BLOCK
Downloads: 166

(3 Ratings)
Contributed on: 8/3/2013
Description: This program creates a Solidworks Block from a Drawing View (Standard, Detail or Section)
By: Moineau Mechanics
Company: Moineau Mechanics
Category: Drawings 
Tags:
a  block  creates  drawing  from  solidworks  view 
MM_SW_VIEW_2_BLOCK
Downloads: 62

(2 Ratings)
Contributed on: 8/3/2013
Description: This program creates a Solidworks Block from a Drawing View (Standard, Detail or Section)
By: Moineau Mechanics
Company: Moineau Mechanics
Category: Drawings 
Tags:
a  block  creates  drawing  from  solidworks  view 

< 12345 >