DSS-FM Ballscrew Tables
 |
| Title: |
DSS-FM Ballscrew Tables |
| Description: |
FM Series tables are ideal for applications requiring low angular errors and high speeds. This unit utilizes precision ground interface surfaces and crossed roller ways to achieve exceptionally low angular errors and high stiffness. Its center-driven ballscrew design allows speeds to 500mm/second and is only 3 inches high. The inherent symmetry of its center-driven design avoids offset torques that can be created by side-driven stages. Convenient ballscrew access makes servicing easy, and a way cover provides pinch point protection, eliminating any safety concerns. These units include a motor with coupling, a knob for fine manual control, Hall-effect limit sensors, and locking motor and limit/encoder connectors ith strain-relieved cables. The FM Series is an ideal choice for automation and inspection systems, disk drive testing, and laser machining.applications. |
| Catalog: |
Danaher Motion PSG |
|
|
|
LMB - Crossed Roller Ballscrew Table
 |
| Title: |
LMB - Crossed Roller Ballscrew Table |
| Description: |
The DPS LMB stage takes our standard LM stage andupgrades it in several ways. First and most importantly theenhancement adds a precision ground preloaded ballscrewinside the same cross section. The added ballscrewincreases axial stiffness and the preloaded nature allowslinear encoders to be used in servo applications.Duty cycle, life, and speed are also greatly improved withthis upgrade. Leads are available in 2 and 5mm standardsizes. A larger thrust bearing is also used to increase axialload carrying capabilities These enhancements make thisstage ideal to be used in vertical applications.Optional inline brakes are available to prevent the stagefrom back driving. The LMB ballscrew driven stage hasalso added pinch cover design, eliminating any safety concerns.Travels are available from 2 to 10 inches. |
| Catalog: |
Danaher Motion PSG |
|
|
|
LM™ Crossed Roller Way Table
 |
| Title: |
LM™ Crossed Roller Way Table |
| Description: |
The LM Series is a very popular single-axis positioning table. It incorporates precision crossed roller ways into the same envelope as its TM series counterpart providing high load capacities and increased stiffness. The LM Series has the bearing journals machined into the base section, as most of NEAT’s stages do, to ensure precise location. Standard units include a motor, knob, limit switches, and locking connectors. |
| Catalog: |
Danaher Motion PSG |
|
|
|
MAG Moving Magnet Linear Motor Stage
 |
| Title: |
MAG Moving Magnet Linear Motor Stage |
| Description: |
The DPS MAG linear motor stage is a very compact, high performance, direct drive table suitable for use in a wide range of applications.The integral iron core direct drive linear motor featuresup to 5G acceleration and a peak force generation of 170N. Its high acceleration and force generation make it an ideal candidate for demanding life sciences, photonics, semiconductor, and disk positioning applications.MAG stages are very compact; measuring 50mm tall by 150mm wide.Any two versions will bolt directly together to form a very stiff, compact X-Y assembly, without the need of adapter plates.MAG stages employ a moving magnet design, which locates all cables and connectors in the stationary base.The resulting absence of moving cable is clean and compact and eliminates motion errors due to cable forces.The precision ground cross roller way provide high stiffness together with smooth motion, and are capable of supporting torques due to offset loads. Cage creep is eliminated through the use of geared cage assemblies. The built-in encoder is available with resolutions from 1 micron down to 50nm. Standard travels range from 50mm to 300mm inincrements of 50mm. |
| Catalog: |
Danaher Motion PSG |
|
|
|
RM Stage Series
 |
| Title: |
RM Stage Series |
| Description: |
Small, Ball Way TablesThe RMS Series of positioning tables is a "shuttle" configuration of our RM tables. Recirculating ball modules are incorporated in the table top, resulting in a compact, 3.00" long x 3.25" wide shuttle. The remaining dimensions match those of our full-top RM Series, including base and shuttle mounting holes. This allows units of either series to be bolted together to form X-Y positioning assemblies. Hall-effect limit sensors are built-in to each table, and in-line connectors allow modular cabling to both the motor and limit switches. A motor, knob, and coupling are also included on all standard units.Small, Ball Way ShuttlesThe RM Series of single-axis positioning tables provides a compact, low cost alternative to conventional full-sized units. Overall dimensions are 2" high x 2 5/8" wide, with a table length equal to 1" more than the table travel, making them ideal for disk drive certifiers, analyzers, spinstands and other applications with demanding space constraints. Hall-effect limit sensors are built-in to each table. Miniature, latching, inline connectors provide a convenient detachable coupling between the table and its control electronics. A motor, knob, and coupling are also included. |
| Catalog: |
Danaher Motion PSG |
|
|
|
TM Ball Way Table
 |
| Title: |
TM Ball Way Table |
| Description: |
The TM Series is one of our most widely used lines of single- axis positioning tables. Its center-driven leadscrew design provides highly repeatable motion in a compact unit. It incorporates cost-effective ball ways, and is built using a monolithic, two piece design which precisely locates the critical duplex and radial bearing journals within the massive base section. They come complete and ready to operate, including a motor with knob, Hall-effect limit switches, and locking connectors. |
| Catalog: |
Danaher Motion PSG |
|
|
|
TMS-Single-Axis Shuttle
 |
| Title: |
TMS-Single-Axis Shuttle |
| Description: |
The TMS Series is a "shuttle" version of our TM series of single- axis positioning tables. TMS models replace the conventional, full sized top of the TM series with a recirculating shuttle assembly. This results in a much more compact overall moving envelope for the table for use in limited space applications. These units come complete and ready to operate with a motor, flexible coupling, knob, Hall-effect limit switches, and locking connectors. |
| Catalog: |
Danaher Motion PSG |
|
|
|
|