Custom Brushed Motors (MS, MR)

DYNETIC SYSTEMS' Custom Airborne Right Angle Gear motor for pilot control adjustment. Used in jet aircraft. High torque planetary gearhead with custom output shaft & mounting. RTCADO-160D EMI filtering. Built-in thermal & overcurrent limiting. Bonded

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 28 Volt DC
• .6 Amps
• 124 in-oz Cont. Torque
• 240 in-oz Stall Torque
• 78 in-lbs NPX Torque
• 120 RPM
• 30:1 Ratio
• 1.4 lbs Unit Weight

DYNETIC SYSTEMS' Antenna Actuator Assembly, Brushed DC motor, tachometer, planetary gearhead, hand crank interface connectorization, sealed, CARC paint. Extreme terperature modifications, salt water protection, COTS availability. Presently deployed in the field.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 75 Volt DC
• 6.4 Amps
• 39 ft-lbs Cont. Torque
• 100 ft-lb Peakl Torque
• 65 RPM
• 3 volt tachometer
• MIL-STD-461 EMI approved
• 19.3 lbs Unit Weight
• 55:1 Ratio
• 1.4 lbs Unit Weight

DYNETIC SYSTEMS' AXIS DRIVE MOTOR

Custom designed hollow shaft gear motor. Encoder ready high torque DC brushed motor and strong, quiet, worm drive reduction with hardened, ground gears. Powers scanning equipment for medical diagnostic machine.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 48 Volt DC
• 4.4 Amps
• 66 in-lbs Cont. Torque
• 1000 in-lbs Peak Torque
• 26 RPM
• 10 lbs Unit Weight

DYNETIC SYSTEMS' PATIENT BED GEARMOTOR

Custom Right Angle Gear motor for patient bed adjustment. Smooth, quiet, powerful worm gearing Encoder ready DC brushed motor extended output shaft with hand crank feature.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 24 Volt DC
• 1.6 Amps
• 59 in-lbs Cont. Torque
• 70 in-lbs Peak Torque
• 80 RPM
• 15:1 Ratio
  

DYNETIC SYSTEMS' CAMERA LIFT ACTUATOR

Custom Designed Airborne Camera Lift Actuator System. Positions infrared & optical cameras on surveillance & security aircraft. Redundant dual drive motor/clutch assemblies, worm drive gear reduction holding brake, EMI filtering, Bulkhead mounting plate.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 28 Volt DC
• 5.3/5.3 Amps
• 10 in-lbs Cont. Torque
• 70 in-lbs Peak Torque
• 15 in-lbs Holding Torque
• -40ºC to +100ºC Operation
• 9 lbs Unit Weight

DYNETIC SYSTEMS' BLOOD CENTRIFUGE MOTOR

Blood Centrifuge Motor. Custom designed hollow shaft brush motor directly drives centrifuge bowl. Precision ground stainless steel shaft, internal EMI filter. Polished shaft extension for vacuum seal.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 24 Volt DC
• 2.1 Amps
• 6 in-oz Cont. Torque
• 42 in-oz Peak Torque
• 7700 RPMvv
• 10,000 RPM max.
• 5/10,000" total runout

DYNETIC SYSTEMS' DUAL DRIVE ASSEMBLY

Dual Gearhead Drive Motor. IP54 Sealed Planetary Gear motor for driving the wheels of a video inspection robot.
Unit becomes an integral part of the robot chassis.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 24 Volt DC
• 6.1 Amps
• 104 in-lbs Cont. Torque
• 295 in-lbs Peak Torque
• 100 RPM
• 49:1 Ratio
• 9 lbs unit weight

DYNETIC SYSTEMS' ACTUATOR DRIVE FOR GLOBAL HAWK

Custom Brushed Specially Designed Gear Motor designed for leading manufacturer of military avionics controls. Specifications are considered confidential.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• ALL SPECIFICATIONS ARE CONFIDENTIAL

DYNETIC SYSTEMS' LIFT GATE ACTUATOR

Custom designed rugged Gear Motor Assembly for railroad crossing gates, Powerful DC brushed motor, high torque worm drive gear reduction, and fail safe brake, dual drive output shaft

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

• 24 Volts DC
• 10 Amps
• 260 in-lbs Cont. Torque
• 1500 in-lbs Peak Torque
• 790 in-lbs Holding Torque
• -20°C Operation
• 13.5 lbs Unit Weight