Turbine Flowmeters

PRECISION FLOW METER

• 3-4 ms speed of response typical, dependent on meter size.
  
• High turn-down capability, up to 100:1.
  
• Excellent repeatability, less than +/- 0.05%.
  
• Linearity less than +/-0.1% with linearizing electronics, less than +/- 0.5% raw data over 10:1 range.
  
• Extensive primary standard NIST traceable calibration capability, offering a wide range of fluids, viscosities and flow rates. Accuracy less than +/-0.05% typical, dependant on specific calibrator.
  
• Overall system accuracy typically +/-0.123 using RSS.
  
• Standard materials of construction are 316 SS housing and 430F SS rotor. Additional materials available.
  
• Robust, compact design capably of compliance to severe shock and vibration requirements.
  
• Standard pressure capabilities up to 5000 PSIG. Extreme operating pressures available in custom packages.
  
• High shock designs available for applications with large hydraulic water hammer effects.
  
• Custom designs to meet the specific application are routine, not the exception.
  

LOW FLOW TURBINE FLOWMETERS

• Operates in low flow ranges where standard axial turbine flowmeters cannot be used
  
• Accuracy of ±0.25% in liquids and ±0.60% in gas when paired with linearizing electronics
  
• Repeatability better than ±0.1% of reading in liquids and ±0.2% of reading in gas
  
• Measures flow rates as low as 0.001 GPM (3.78 mLPM) in liquids, and 0.0015 ACFM (2.5 LPH) in gas
  
• Standard configuration withstands pressures up to 400 BAR (5,800 psi), higher operating pressures are available, dependent on end fittings
  
• Compact size, 3" face-to-face with NPT or MS end connections

PRECISION HIGH SHOCK FLOW METER

• 3-4 ms speed of response typical, dependent on meter size.
  
• High turn-down capability, up to 100:1.
  
• Excellent repeatability, less than +/- 0.05%.
  
• Linearity less than +/-0.1% with linearizing electronics, less than +/- 0.5% raw data over 10:1 range.
  
• Extensive primary standard NIST traceable calibration capability, offering a wide range of fluids, viscosities and flow rates. Accuracy less than +/-0.05% typical, dependant on specific calibrator.
  
• Overall system accuracy typically +/-0.123 using RSS.
  
• Standard materials of construction are 316 SS housing and 430F SS rotor. Additional materials available.
  
• Robust, compact design capably of compliance to severe shock and vibration requirements.
  
• Standard pressure capabilities up to 5000 PSIG. Extreme operating pressures available in custom packages.
  
• High shock designs available for applications with large hydraulic water hammer effects.
  
• Custom designs to meet the specific application are routine, not the exception.