Clamping Systems

Cam action, positive down force clamps can be used in series. Clamp base should be installed in a slot to retain location. Clamp base provides for higher clamping; height is determined by depth of slot. Mounting screws included.

These hardened and ground clamps can produce holding forces of over 19,000 lbs.The OK-Vise clamp achieves this by its cross-wedge construction,which allows the OK-Vise clamp to lock firmly in every direction as it is tightened down. Jaws, with 30-34 HRC, can be machined to suit the geometry of the workpiece. Mounting screws included.

The Mitee-BiteTM clamping system combines strength, versatility and performance with economy and ease of use. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Its small size allows more parts per load on multiple series jobs. The low profile makes programming easier because there are no clamps to jump over. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Economical - all six sides of the hex nut can be used. Available in six sizes for use on multiple part fixtures. Metric sizes are in millimeters. MB-10203 and MB-50207 are stainless steel.

The Mitee-BiteTM clamping system combines strength, versatility and performance with economy and ease of use. Consisting of a cam action socket cap screw with a brass hex washer, set ups are simplified even for hard to hold parts. Its small size allows more parts per load on multiple series jobs. The low profile makes programming easier because there are no clamps to jump over. Fast to use (just 1/4 turn of screw loosens clamp) and no loose parts to set up each time. Economical - all six sides of the hex nut can be used. Available in six sizes for use on multiple part fixtures. Metric sizes are in millimeters. MB-10203 and MB-50207 are stainless steel.

•Ideal for secondary operations on lathe parts
•Easily machined to size on lathe or mill
•Excellent for palletized setups
•Allows more parts per work cube or fixture plates
•Clamp body made of mild steel for machinability
•Tighten with hex key or hydraulic pull cylinders (drill clearance hole for longer bolt into cylinder)
•Three mounting screws included

These clamps are ideal to hold multiple parts on an inside diameter for machining on a machining center. These clamps are produced in 10 sizes and can hold internal diameters from .16" to 4.06". Expand clamp approximately .005" over relaxed diameter and machine to fit work piece bore.

The "G" dimension is the minimum diameter that the "F" dimension can be machined or turned (down) to.

Low profile, fast cam action. Hardened steel bites into workpiece for secure clamping for castings and rough cut stock. Follows contour of part for maximum contact.

New low-profile fixture clamps for use with any workholding application. Available in three different sizes and three different styles. Sizes are 4-40, 8-32 and 1/4-20 with two different edges, knife edge or blunt edge. Clamps are made of tool steel or non-marring brass. Simply machine a slot for the clamp then drill and tap for the screw. Assemble clamp and loosely screw to fixture. Insert work piece and tighten cap screw.

The compact clamp is available with extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece, enabling you to fixture unusual applications easily. The specially designed steel wedge spreads the clamping force uniformly on both sides of the aluminum channel. A unique locking plate is provided to make the clamp rigid while machining the jaws to your specifications. Available in two sizes. Order one piece and you will receive one complete assembly with mounting screws and locking plate.

Works in plates with tapped hole layouts or T-slot configurations providing flexible set ups for hard to hold parts. Can be mounted vertically or horizontally. Stops locate workpiece for repeat positioning. Tapered mounting slots prevents movement when clamping pressure is applied. Closed slot.

These hardened and ground clamps can produce holding forces of over 19,000 lbs. The OK-Vise clamp achieves this by its cross-wedge construction, which allows the clamp to lock firmly in every direction as it is tightened down. Jaws with 30-34 HRC can be machined to suit the geometry of the workpiece. Includes mounting screws.