Rotomation, Inc

Models inRotomation, Inc Catalog
Results 1-10 of 27
< Previous Page123Next Page >
Results per page:
Supplier
Description
The Shaft Mounting Adapter provides an easy way to couple the output shafts from any of our rotary or indexing actuators to your application's load. Available with our own mounting pattern, blank, or with custom mounting patterns available on request. They can also be machined with a male or female pilot for easy centering of your load's interface.
Configurations?
Yes
Downloads
28
Added on
19 Dec, 2017
Supplier
Description
This Pick and Place Actuator features a 5/8" linear bore, from 0.5"-12" stroke on 1/4" increments, and dual 5/8" rotary bores up to 730 degrees, with 98 in-lb of torque at 100 PSI. Stabilization for extended shaft and control options available. Built with oversized bearings for heavy duty loads.
Configurations?
Yes
Downloads
5
Added on
7 Feb, 2018
Supplier
Description
This Pick and Place Actuator features a 1-3/8" linear bore, from 0.5"-12" stroke on 1/4" increments, and dual 1-3/8" rotary bores up to 730 degrees, with 238 in-lb of torque at 80 PSI. Stabilization for extended shaft and control options available. Built with oversized bearings for heavy duty loads.
Configurations?
Yes
Downloads
2
Added on
7 Feb, 2018
Supplier
Description
This Pick and Place Actuator features a 1-3/8" linear bore, from 0.5"-12" stroke on 1/4" increments, and 1-3/8" rotary bore up to 730 degrees, with 149 in-lb of torque at 100 PSI. Stabilization for extended shaft and control options available. Built with oversized bearings for heavy duty loads.
Configurations?
Yes
Downloads
0
Added on
7 Feb, 2018
Supplier
Description
This Pick and Place Actuator features a 5/8" linear bore, from 0.5"-12" stroke on 1/4" increments, and 5/8" rotary bore up to 730 degrees, with 7 in-lb of torque at 100 PSI. Stabilization for extended shaft and control options available. Built with oversized bearings for heavy duty loads.
Configurations?
Yes
Downloads
2
Added on
5 Feb, 2018
Supplier
Description
This Pick and Place Actuator features a 1-3/8" linear bore, from 0.5"-12" stroke on 1/4" increments, and 1" rotary bore up to 730 degrees, with 49 in-lb of torque at 100 PSI. Stabilization for extended shaft and control options available. Built with oversized bearings for heavy duty loads.
Configurations?
Yes
Downloads
8
Added on
7 Feb, 2018
Supplier
Description
Rugged 1" bore dual rack rotary actuator with a 0.500" diameter one-piece pinion shaft that delivers about 78 in-lb of torque at 80 psi, with oversized bearings to withstand heavy-duty load.
Configurations?
Yes
Downloads
71
Added on
18 Oct, 2017
Supplier
Description
Rugged 1-3/8" bore dual rack rotary actuator with a 0.750" diameter one-piece pinion shaft that delivers about 238 in-lb of torque at 80 psi, with oversized bearings to withstand heavy-duty load.
Configurations?
Yes
Downloads
51
Added on
27 Oct, 2017
Supplier
Description
The X22 looks like one of our conventional rotary actuators, but it drives its shaft incrementally in one direction. The steps are accurate within +/- 0.2 degree, and error does not accumulate. Capable of approximately 78 in-lb of torque at 80 psi, available in a wide range of angles between 12 and 360 degrees.
Configurations?
Yes
Downloads
12
Added on
4 Dec, 2017
Supplier
Description
Rugged 5/8" bore dual rack rotary actuator with a 0.250" or 0.375" diameter one-piece pinion shaft that delivers about 24 in-lb of torque at 80 psi, with oversized bearings to withstand heavy-duty load.
Configurations?
Yes
Downloads
30
Added on
13 Nov, 2017

About

Since 1967, Rotomation has maintained its service and product reputation in the manufacture of practical, rugged, rotary actuators that produce a variety of shaft motions. They provide direct process actuation for reliable, high speed operation. All our parts are made in our own state-of-the-art C...
More...

Contact Details

Address:
11 Sunshine Blvd
Ormond Beach, 32174
Florida, United States
Phone: (386) 676-6377
Fax: (386) 676-6379
Email:
Website: www.rotomation.com