VEX Robotics

Models inVEX Robotics Catalog
Results 1-10 of 265
< Previous Page12345...27Next Page >
Results per page:
Supplier
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
No
Downloads
14
Added on
24 Jul, 2015
Supplier
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
No
Downloads
36
Added on
24 Jul, 2015
Supplier
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
No
Downloads
12
Added on
24 Jul, 2015
Supplier
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
No
Downloads
38
Added on
24 Jul, 2015
Supplier
Description
The Pneumatic Control Module from Cross the Road Electronics provides an easy all-in-one interface for pneumatic components. Includes compressor control (replaces a Spike H-Bridge Relay). All commands run through CAN Bus. Designed to work with the roboRIO FRC control system.
Configurations?
No
Downloads
75
Added on
24 Jul, 2015
Supplier
Description
The Power Distribution Panel (PDP) from Cross the Road Electronics is the latest DC power interface for competition robotics. The PDP uses CAN to connect directly to the roboRIO and allows for individual current monitoring on each channel. (8) 40A and (8) 20/30A channels. Individual protection for the roboRIO and VRM/PCM. Designed to work with the roboRIO FRC control system.
Configurations?
No
Downloads
182
Added on
24 Jul, 2015
Supplier
Description
The VersaFrame is a construction system that allows teams to build an upper frame in whatever configuration they can imagine. Pre-drilled holes on a standard 1" pitch are designed to be used with #8 screws and 5/32" rivets, and can be easily drilled out for larger hardware. No need for precision fabrication capability - with just a saw and a drill, any team can build light-weight world-class frames. VersaFrame gussets provide for connections in many different configurations. In addition to a variety of angles commonly used in mechanical design, custom bearing and motor mounting gussets allow for seamless integration into designs incorporating rollers or other motion elements.
Configurations?
No
Downloads
15
Added on
24 Jul, 2015
Supplier
Description
The Voltage Regulator Module from Cross the Road Electronics provides access to different constant voltages for custom sensors
Configurations?
No
Downloads
83
Added on
24 Jul, 2015
Supplier
Description
Connects two sections of 1/2” Hex together. Clamping design provides axial retention of both shafts, while providing high torque transfer capability. Clamped together with (8x) $4-40 x 0.375" Socket Head Bolts. Allows for 3/4" of engagement from each shaft. Use included holes to pin each side in place. Flats on each side allow for the use of a wrench to turn the coupled shafts.
Configurations?
No
Downloads
26
Added on
16 Jul, 2015
Supplier
Description
ThunderHex Stock & Bearings will revolutionize the ways teams use hex shaft. ThunderHex Stock works in all applications where 1/2" Hex Shaft will work and also includes rounded corners. These rounded corners allow the shaft to pilot inside a 13.75 mm round (ThunderHex) Bearing instead of a standard 1/2" Hex Bearing. This eliminates some difficult manufacturing tolerances and results in a MUCH smoother end result. Simply put, ThunderHex Bearings are the best way to create smooth-running hex shafts, and ThunderHex Stock helps you accomplish this without a lathe. Also, since you're essentially putting a round peg in a round hole, no more struggling to align the hex of your shaft with the hex hole of your bearing. All ThunderHex Stock also includes a subtle but very useful feature: a 0.201" hole through the center. This hole provides a clearance fit for a #10 bolt or can be tapped for 1/4-20 bolts. This means that you no longer need a precision lathe to create custom-length, high-strength standoffs; simply cut the ThunderHex shaft to size and tap it with a 1/4-20 (or 1/4-28) thread.
Configurations?
No
Downloads
22
Added on
16 Jul, 2015
Catalog Tags

Contact Details

Address:
1519 Interstate 30 West
Greenville, 75402
Texas, United States
Phone: 19034530802
Email:
Website: http://www.vexrobotics.co...