Dynetic

Models inDynetic CatalogDC Brushed MotorsCustom Brushed Motors (MS, MR)
Results 1-10 of 19
< Previous Page12Next Page >
Results per page:
Supplier
Description
None Provided
Configurations?
No
Downloads
483
Added on
30 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' Custom Airborne Right Angle Gear motor for pilot control adjustment. Used in jet aircraft. High torque planetary gearhead with custom output shaft & mounting. RTCADO-160D EMI filtering. Built-in thermal & overcurrent limiting. Bonded

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 28 Volt DC
  • .6 Amps
  • 124 in-oz Cont. Torque
  • 240 in-oz Stall Torque
  • 78 in-lbs NPX Torque
  • 120 RPM
  • 30:1 Ratio
  • 1.4 lbs Unit Weight
Configurations?
No
Downloads
1124
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' Antenna Actuator Assembly, Brushed DC motor, tachometer, planetary gearhead, hand crank interface connectorization, sealed, CARC paint. Extreme terperature modifications, salt water protection, COTS availability. Presently deployed in the field.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 75 Volt DC
  • 6.4 Amps
  • 39 ft-lbs Cont. Torque
  • 100 ft-lb Peakl Torque
  • 65 RPM
  • 3 volt tachometer
  • MIL-STD-461 EMI approved
  • 19.3 lbs Unit Weight
  • 55:1 Ratio
  • 1.4 lbs Unit Weight
Configurations?
No
Downloads
513
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' AXIS DRIVE MOTOR

Custom designed hollow shaft gear motor. Encoder ready high torque DC brushed motor and strong, quiet, worm drive reduction with hardened, ground gears. Powers scanning equipment for medical diagnostic machine.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 48 Volt DC
  • 4.4 Amps
  • 66 in-lbs Cont. Torque
  • 1000 in-lbs Peak Torque
  • 26 RPM
  • 10 lbs Unit Weight
Configurations?
No
Downloads
1940
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' PATIENT BED GEARMOTOR

Custom Right Angle Gear motor for patient bed adjustment. Smooth, quiet, powerful worm gearing Encoder ready DC brushed motor extended output shaft with hand crank feature.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volt DC
  • 1.6 Amps
  • 59 in-lbs Cont. Torque
  • 70 in-lbs Peak Torque
  • 80 RPM
  • 15:1 Ratio
Configurations?
No
Downloads
567
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' CAMERA LIFT ACTUATOR

Custom Designed Airborne Camera Lift Actuator System. Positions infrared & optical cameras on surveillance & security aircraft. Redundant dual drive motor/clutch assemblies, worm drive gear reduction holding brake, EMI filtering, Bulkhead mounting plate.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 28 Volt DC
  • 5.3/5.3 Amps
  • 10 in-lbs Cont. Torque
  • 70 in-lbs Peak Torque
  • 15 in-lbs Holding Torque
  • -40ºC to +100ºC Operation
  • 9 lbs Unit Weight
Configurations?
No
Downloads
1077
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' BLOOD CENTRIFUGE MOTOR

Blood Centrifuge Motor. Custom designed hollow shaft brush motor directly drives centrifuge bowl. Precision ground stainless steel shaft, internal EMI filter. Polished shaft extension for vacuum seal.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volt DC
  • 2.1 Amps
  • 6 in-oz Cont. Torque
  • 42 in-oz Peak Torque
  • 7700 RPMvv
  • 10,000 RPM max.
  • 5/10,000" total runout
Configurations?
No
Downloads
858
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' DUAL DRIVE ASSEMBLY

Dual Gearhead Drive Motor. IP54 Sealed Planetary Gear motor for driving the wheels of a video inspection robot.
Unit becomes an integral part of the robot chassis.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volt DC
  • 6.1 Amps
  • 104 in-lbs Cont. Torque
  • 295 in-lbs Peak Torque
  • 100 RPM
  • 49:1 Ratio
  • 9 lbs unit weight
Configurations?
No
Downloads
920
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' ACTUATOR DRIVE FOR GLOBAL HAWK

Custom Brushed Specially Designed Gear Motor designed for leading manufacturer of military avionics controls. Specifications are considered confidential.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • ALL SPECIFICATIONS ARE CONFIDENTIAL
Configurations?
No
Downloads
497
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' MOTORIZED BACKBOARD ASSEMBLY

Compact, Precision Gear motor powers emergency rescue equipment. High torque planetary gearing combined with a custom high peak torque DC brushed motor.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volt DC
  • 2.8 Amps
  • 21 ft-lbs Cont. Torque
  • 40 ft-lbs Peak Torque
  • 19 RPM
  • 256:1 Ratio
Configurations?
No
Downloads
469
Added on
29 Oct, 2004

About

Superior craftsmanship, individualized customization, innovative, materials and designs, uncompromising reliability,and personalized support for your motion control products are designed to meet and exceed your expectations to deliver peace of mind.

Our mission is to design and manufacture an...
More...

Contact Details

Address:
19128 INDUSTRIAL BLVD
ELK RIVER, 55330
MN, US
Phone: 763-441-4300
Fax: 763-441-5217
Email:
Website: http://www.dynetic.com