Dynetic

Models inDynetic CatalogDC Brushed MotorsCustom Brushed Motors (MS, MR)
Results 11-19 of 19
< Previous Page12Next Page >
Results per page:
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' PATIENT BED GEARMOTOR

Custom Right Angle Gear motor for patient bed adjustment. Smooth, quiet, powerful worm gearing Encoder ready DC brushed motor extended output shaft with hand crank feature.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volt DC
  • 1.6 Amps
  • 59 in-lbs Cont. Torque
  • 70 in-lbs Peak Torque
  • 80 RPM
  • 15:1 Ratio
Configurations?
No
Downloads
566
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

PRECISION GEAR MOTOR

Compact, Precision Gear motor powers emergency rescue equipment. High torque planetry gearing combined with a custom high eak torque DC brushed motor.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volts DC
  • 2.8 Amps
  • 21 ft-lbs Cont. Torque
  • 40 ft lbs Peak Torque
  • 19 RPM
  • 256:1 Ratio
Configurations?
No
Downloads
452
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' PROPELLER ACTUATOR

Sealed Gear Motor Assembly. Custom designed for C130 aircraft propeller featuring actuator used on test stands. Incorporates a high torque planetary gearhead, brushed motor, O-ring sealed casing, and worm gear.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volt DC
  • 1.7 Amps
  • 3.6 in-lbs Cont. Torque
  • 30 in-lbs Peak Torque
  • 16:1 Ratio
  • 420 RPM
  • 17 oz Unit Weight
  • IP65 Sealed
Configurations?
No
Downloads
1015
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' ROBOTIC DRIVE ASSEMBLY

Custom Designed Drive Gear Motor Assembly for leading manufacturer of military robots. Mounts directly in chassis frame. Incorporates wheel & sprocket hub. Brushed DC motor, holding brake, 3 stage planetary gear reduction, cable harness. High temperature modifications.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 30 Volt DC
  • 5 Amps
  • Torque - Classified
  • Speed - Classified
Configurations?
No
Downloads
890
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' SPIN COATER MOTOR

Platen Drive Motor for spin coating operations during semiconductor manufacturing. Direct drive DC brushed hollow shaft motor. Encoder velocity & position feedback. Vacuum seal mounting plate. IP54 O-ring sealed housing. Precision ground shaft.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 60 Volt DC
  • 4.2 Amps
  • 30 in-oz Rated Torque
  • 10,00 RPM
Configurations?
No
Downloads
759
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' STAINLESS STEEL SEALED MOTOR

"Motor In A Can" custom design. High torque planetary gear motor with IP37 O-ring sealed stainless steel housing. Powers fishing reels on ocean going commercial fishing vessels. Saltwater rated.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volt DC
  • 13 Amps
  • 80 in-lbs Cont. Torque
  • 2000 in-lbs Peak Torque
  • 200 RPM
Configurations?
No
Downloads
273
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' THRUSTER MOTOR

Propulsion Thruster Motor for unmanned underwater robot. Up to six units used per machine. Brushed high torque Rare Earth magnet planetary gear motor with custom output shaft. Half the size and weight of previously used motor with more thrust.

This is a custom design based on our standard product line. The model cannot be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 120 Volt DC
  • 2 Amps
  • 20 in-lbs Cont. Torque
  • 70 in-lbs Peak Torque
  • 4.2:1 Ratio
  • 1500 RPM
  • 2400 RPM max.
  • .3 Horsepower cont.
  • 1.2 Horsepower Peak
  • 2.5 lbs Unit Weight
Configurations?
No
Downloads
1315
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' WET FUEL PUMP MOTOR

Custom Airborne Fuel Transfer/Backup Pump Motor for jet aircraft. Explosion Proof, Fuel Flooded "Wet" Design. Custom mounting, shafting, and connectorization. Bonded, RTCA DO160D internal EMI filter. IP65 O-ring sealed. 100% dynamometer testing. Stainless steel mounting bracket.

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 28 Volt DC
  • 7 Amps
  • 25 in-loz Cont. Torque
  • 8300 RPM
Configurations?
No
Downloads
1304
Added on
29 Oct, 2004
Supplier
Description
Untitled Document

DYNETIC SYSTEMS' LIFT GATE ACTUATOR

Custom designed rugged Gear Motor Assembly for railroad crossing gates, Powerful DC brushed motor, high torque worm drive gear reduction, and fail safe brake, dual drive output shaft

This is a custom design based on our standard product line. The model cannout be configured. If you would like customize this to your application please contact applications engineering at 1-800-899-4372 or sales@dynetic.com

  • 24 Volts DC
  • 10 Amps
  • 260 in-lbs Cont. Torque
  • 1500 in-lbs Peak Torque
  • 790 in-lbs Holding Torque
  • -20°C Operation
  • 13.5 lbs Unit Weight
Configurations?
No
Downloads
803
Added on
29 Oct, 2004

About

Superior craftsmanship, individualized customization, innovative, materials and designs, uncompromising reliability,and personalized support for your motion control products are designed to meet and exceed your expectations to deliver peace of mind.

Our mission is to design and manufacture an...
More...

Contact Details

Address:
19128 INDUSTRIAL BLVD
ELK RIVER, 55330
MN, US
Phone: 763-441-4300
Fax: 763-441-5217
Email:
Website: http://www.dynetic.com