Sierra Pacific Engineering and Products

Models inSierra Pacific Engineering and Products CatalogHinges
Category:
Hinges
Results 161-170 of 1535
< Previous Page1...1516171819...154Next Page >
Results per page:
Name
Title
Loose Joint Hinge
Supplier
Description
Material: Steel
Finish: Mill
Orientation: Right Hand
Type: Loose Joint
Description: Description

Features:
  • Lift off hinges are a cost effective solution for safely removing doors.
  • Most of our hinges are in stock and available for immediate shipping.
  • Some Male and Female leaves may be purchased separately.
  • These are also referred to as Slip Joint Hinges, Take Apart Hinges or Loose Joint Hinges.
  • Loose Joint hinges without holes may be welded in place, or holes punched for screw or rivet mounting.


    • Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS TAKE APART HINGE-.719 LEAF WIDTH X 1.50 LONG-.050 THK-.120 CDS PIN-.47 LONG-.161 HOLES-MILL-RIGHT HAND MALE ONLY
    • Category
    Configurations?
    Yes
    Downloads
    18
    Added on
    19 Mar, 2010
    Name
    Title
    Loose Joint Hinge
    Supplier
    Description
    Material: Steel
    Finish: Mill
    Orientation: Right Hand
    Type: Loose Joint
    Description: Description

    Features:
  • Lift off hinges are a cost effective solution for safely removing doors.
  • Most of our hinges are in stock and available for immediate shipping.
  • Some Male and Female leaves may be purchased separately.
  • These are also referred to as Slip Joint Hinges, Take Apart Hinges or Loose Joint Hinges.
  • Loose Joint hinges without holes may be welded in place, or holes punched for screw or rivet mounting.


    • Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS TAKE APART HINGE-.719 LEAF WIDTH X 1.50 LONG-.050 THK-.120 CDS PIN-.47 LONG-NO HOLES-MILL-RIGHT HAND MALE ONLY
    • Category
    Configurations?
    Yes
    Downloads
    9
    Added on
    19 Mar, 2010
    Name
    Title
    Loose Joint Hinge
    Supplier
    Description
    Material: Steel
    Finish: Mill
    Orientation: Right Hand
    Type: Loose Joint
    Description: Description

    Features:
  • These are also referred to as Slip Joint Hinges, Take Apart Hinges or Loose Joint Hinges.
  • Some Male and Female leaves may be purchased separately.
  • Typical range of motion is 270 degrees unless otherwise specified.
  • Most of our hinges are in stock and available for immediate shipping.


    • Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS TAKE APART HINGE-.719 LEAF WIDTH X 1.50 LONG-.050 THK-.120 CDS PIN-.594 LONG-.161 HOLES-MILL-RIGHT HAND MALE ONLY
    • Category
    Configurations?
    Yes
    Downloads
    20
    Added on
    19 Mar, 2010
    Name
    Title
    Loose Joint Hinge
    Supplier
    Description
    Material: Steel
    Finish: Mill
    Orientation: Right Hand
    Type: Loose Joint
    Description: Description

    Features:
  • These are also referred to as Slip Joint Hinges, Take Apart Hinges or Loose Joint Hinges.
  • Some Male and Female leaves may be purchased separately.
  • Typical range of motion is 270 degrees unless otherwise specified.
  • Most of our hinges are in stock and available for immediate shipping.
  • Pins are securely held in place, and mating leaves are curled for easy assembly.
  • Loose Joint hinges without holes may be welded in place, or holes punched for screw or rivet mounting.


    • Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS TAKE APART HINGE-.719 LEAF WIDTH X 1.50 LONG-.050 THK-.120 CDS PIN-.594 LONG-NO HOLES-MILL-RIGHT HAND MALE ONLY
    • Category
    Configurations?
    Yes
    Downloads
    7
    Added on
    19 Mar, 2010
    Name
    Title
    Flag Joint Hinge
    Supplier
    Description
    Material: Stainless Steel
    Finish: Tumbled Deburred
    Orientation: Reversible
    Type: Flag Joint
    Description: Description

    Features:
  • Flag joint hinges are also known as lift off hinges and can be used when door removal in necessary.
  • Hinge is 2.09" long, with a 1.80" open width and a .181" diameter pin.
  • Hinge is made from 304SS and is 0.079" thick.
  • Both leaves are half swaged.
  • Washer is welded to knuckle.
  • No mounting holes allows for hinge to be welded to door.


    • Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • FLAG JOINT HINGE W/ PLASTIC WASHER AND SS WASHER, TUMBLED
    • Category
    Configurations?
    Yes
    Downloads
    19
    Added on
    19 Mar, 2010
    Name
    Title
    Flag Joint Hinge
    Supplier
    Description
    Material: Stainless Steel
    Finish: Electropolished
    Orientation: Reversible
    Type: Flag Joint
    Description: Description

    Features:
  • Flag joint hinges are also known as lift off hinges and can be used when door removal in necessary.
  • Hinge is 3.00" long, with a 2.40" open width and a .250" diameter pin.
  • Hinges are made from 304SS and are 0.079" thick.
  • Both leaves are half swaged.
  • Washer is welded to knuckle.
  • No mounting holes allows for hinge to be welded to door.


    • Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • SS FLAG JOINT, HALF SWGD, ELECTROPOLISHED
    • Category
    Configurations?
    Yes
    Downloads
    20
    Added on
    19 Mar, 2010
    Name
    Title
    Flag Joint Hinge
    Supplier
    Description
    Material: Steel
    Finish: Mill
    Orientation: Reversible
    Type: Flag Joint
    Description: Description

    Features:
  • Flag joint hinges are also known as lift off hinges and can be used when door removal in necessary.
  • Hinge is 4.00" long, with a 2.50" open width and a .512" diameter pin.
  • Hinges are made from cold rolled steel and are 0.120" thick.
  • No mounting holes allows for hinge to be welded to door.

    • Industries:
    Trailer Parts
    Truck Parts

    Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • STEEL FLAG JOINT, DOUBLE WRAPPED, MILL
    • Category
    Configurations?
    Yes
    Downloads
    32
    Added on
    19 Mar, 2010
    Name
    Title
    Flag Joint Hinge
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Orientation: Reversible
    Type: Flag Joint
    Description: Description

    Features:
  • Flag joint hinges are also known as lift off hinges and can be used when door removal in necessary.
  • Hinge is 4.00" long, with a 2.50" open width and a .512" diameter pin.
  • Hinges are made from cold rolled steel and are 0.120" thick.
  • No mounting holes allows for hinge to be welded to door.

    • Industries:
    Trailer Parts
    Truck Parts

    Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • STEEL FLAG JOINT, DOUBLE WRAPPED, ZINC PLTD
    • Category
    Configurations?
    Yes
    Downloads
    28
    Added on
    19 Mar, 2010
    Name
    Title
    Heavy Duty Strap Hinge
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Type: Heavy
    Description: Description

    Features:
  • Zinc plated strap hinges are perfect for those looking for extra corrosion resistance without the expense of stainless steel.
  • Strap hinges work well with applications requiring wide or heavy doors, making them suitable for sheds, trucks, and trailers.
  • Some strap hinges are embossed for improved strength.

    • Industries:
    Crating / Cases
    Home Improvement

    Categories:
    PRODUCTS / HINGES / STRAP

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • HEAVY STRAP HINGE, 4.00 CLOSED WIDTH, .091 THK, #8 SCREW, BLUE ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    13
    Added on
    25 Mar, 2010
    Name
    Title
    Heavy Duty Strap Hinge
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Type: Heavy
    Description: Description

    Features:
  • Zinc plated strap hinges are perfect for those looking for extra corrosion resistance without the expense of stainless steel.
  • Strap hinges work well with applications requiring wide or heavy doors, making them suitable for sheds, trucks, and trailers.
  • Our hinges are customizable to fit your needs for moderate order quantities.

    • Industries:
    Crating / Cases
    Home Improvement

    Categories:
    PRODUCTS / HINGES / STRAP

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • HEAVY STRAP HINGE, 5.00 CLOSED WIDTH, .091 THK, #10 SCREW, BLUE ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    9
    Added on
    25 Mar, 2010
    Verified Supplier
    All products for this supplier

    About
    SIERRA PACIFIC ENGINEERING AND PRODUCTS (SPEP) is the premier business to business supplier of engineered products and solutions. SPEP specializes in competitively priced, high quality latches, hinges, hasps, pull knobs, handles, and cam locks.

    Contact Details
    Address:
    4041 Via Oro
    Long Beach, 90810
    California, United States
    Phone: 1-800-433-5554
    Fax: 310-608-0952
    Email:
    Website: http://www.spep.com