Sierra Pacific Engineering and Products

Models inSierra Pacific Engineering and Products CatalogLocks
Category:
Locks
Results 1-10 of 412
< Previous Page12345...42Next Page >
Results per page:
Name
Supplier
Description

spare body nut
• stainless steel material with passivated finish

Weight 0.018 lbs
Material Stainless Steel
Finish Passivated

Category
Configurations?
No
Downloads
6
Added on
26 Jun, 2025
Name
Title
Cam for Cam Locks
Supplier
Description
Material: Steel
Type: Straight with Offset
Description: Description
Finish: Zinc Plated

Features:
  • We offer a variety of cams to fit your needs.
  • Grip or Latching Distance is determined by Housing Length and Cam Offset.
  • Door Thickness is a crucial factor in calculating the grip.
  • Distance of frame from the center of the lock is required for determining cam length.
  • Some cams may be installed on the lock with the offset in (cam forward) or offset out (cam reversed).
  • These cams may be used with K04-series key locking cam locks.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / CAMS

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • 2" LONG CAM, ZINC PLATED, 0.125 OFFSET.
    • Category
    Configurations?
    No
    Downloads
    6
    Added on
    3 May, 2010
    Name
    Title
    1 1/8 [28mm] Key Locking Cam Lock
    Supplier
    Description
    Material: Die Cast Zinc
    Length: 1-1/8
    Finish: SS Face and Plug
    Key Code: AH3
    Cam Fastener: Screw-On
    Rotation: 90 or 180 Degrees
    Description: Description

    Features:
  • Grip or Latching Distance is determined by Housing Length and Cam Offset.
  • Recommended panel cutout varies, depending on panel material.
  • Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
  • Cam Locks include two ringed keys, body nut and cam mounting screw.
  • Cams to be purchased separately.
  • Multiple finish options provide a variety of looks.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / KEY-LOCKABLE

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • SS CAMLOCK-1-1/8-2 AH3-NO CAM-90 OR 180 DEG SCRW-HEXNUT-POLY-
    • Category
    Configurations?
    Yes
    Downloads
    11
    Added on
    17 May, 2013
    Name
    Title
    1 1/8 [28mm] Key Locking Cam Lock
    Supplier
    Description
    Material: Die Cast Zinc
    Length: 1-1/8
    Finish: SS Face and Plug
    Key Code: C413A
    Cam Fastener: Screw-On
    Rotation: 90 Degrees
    Description: Description

    Features:
  • Grip or Latching Distance is determined by Housing Length and Cam Offset.
  • Recommended panel cutout varies, depending on panel material.
  • Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
  • Cam Locks include two ringed keys, body nut and cam mounting screw.
  • Cams to be purchased separately.
  • Standard camlocks are set at Rotation A, which means the key is inserted at the top, and rotates 90 degrees to the right.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / KEY-LOCKABLE

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • SS CAMLOCK-1 1/8-2 413A-NO CAM-90 DEG ROT-HEX NUT-
    • Category
    Configurations?
    Yes
    Downloads
    22
    Added on
    17 May, 2013
    Name
    Title
    Cam Lock with Coin Turn Plug
    Supplier
    Description
    Material: Die Cast Zinc
    Finish: Chrome Plated
    Description: Description

    Features:
  • Grip or Latching Distance is determined by Housing Length and Cam Offset.
  • Recommended panel cutout varies, depending on panel material.
  • Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
  • Tool Activated Locks includes body nut and cam mounting screw.
  • 0.625" long screwdriver keyed cam lock with a screw on cam fastener (cam NOT included)
  • They are an excellent and affordable choice for securing cabinets and doors.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / MISCELLANEOUS

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAMLOCK,5/8,CP COIN,ROTA,SCRW,NO CAM
    • Category
    Configurations?
    Yes
    Downloads
    39
    Added on
    17 May, 2013
    Name
    Title
    Key Locking Push to Close Bolt Latch
    Supplier
    Description
    Material: Die Cast Zinc
    Finish: Chrome Plated
    Description: Description

    Features:
  • SPEP offers several types of bolt latches, including barrel, spring pull, slam, explosion, and rotary latches.
  • A spring bolt latch uses a compressed spring to keep the bolt in the locked position.
  • Our bolt latches come in aluminum, steel, stainless steel, cast iron, or thermoplastic.

    • Industries:
    Bus
    Marine Parts
    RV
    Truck Parts

    Categories:
    PRODUCTS / LATCHES / BOLT
    PRODUCTS / LOCKS / CAM LOCKS / MISCELLANEOUS

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • DIE CAST BOLT LATCH, SMALL, LOCKING, CH751, CHROME PLATED, BODY NUT MOUNTING, STEEL ZINC PLATED STRIKE
    • Category
    Configurations?
    Yes
    Downloads
    17
    Added on
    24 May, 2013
    Name
    Title
    7/16 [11mm] Key Locking Cam Lock
    Supplier
    Description
    Material: Die Cast Zinc
    Length: 7/16
    Finish: SS Face and Plug
    Key Code: CH751
    Cam Fastener: Spun-On
    Rotation: 90 Degrees
    Description: Description

    Features:
  • Grip or Latching Distance is determined by Housing Length and Cam Offset.
  • Recommended panel cutout varies, depending on panel material.
  • Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
  • Cam Locks include two ringed keys and body nut.
  • Cams are installed by spinning.
  • Cams to be purchased separately.
  • Standard camlocks are single bitted, with double bitted locks available as a custom option.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / KEY-LOCKABLE

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • SS CAMLOCK-7/16-2 CH751-NO CAM-90 DEG-HEXNUT-BULK-CMPNTS ATTACHED
    • Category
    Configurations?
    Yes
    Downloads
    15
    Added on
    2 Jul, 2013
    Name
    Title
    7/16 [11mm] Key Locking Cam Lock
    Supplier
    Description
    Material: Die Cast Zinc
    Length: 7/16
    Finish: SS Face and Plug
    Key Code: C415A
    Cam Fastener: Spun-On
    Rotation: 90 Degrees
    Description: Description

    Features:
  • Grip or Latching Distance is determined by Housing Length and Cam Offset.
  • Recommended panel cutout varies, depending on panel material.
  • Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
  • Cam Locks include two ringed keys and body nut.
  • Cams are installed by spinning.
  • Cams to be purchased separately.
  • Standard camlocks are set at Rotation A, which means the key is inserted at the top, and rotates 90 degrees to the right.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / KEY-LOCKABLE

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • SS CAMLOCK-7/16-2 C415A-NO CAM-90 DEG-HEXNUT-BULK-CMPNTS ATTACHED
    • Category
    Configurations?
    Yes
    Downloads
    7
    Added on
    2 Jul, 2013
    Name
    Title
    Gasket for Cam Lock
    Supplier
    Description
    Description: Description
    Material: Neoprene
    Finish: Black

    Features:
  • GASKET FOR CAMLOCKS, BLACK NEOPRENE
  • Recommended for K04JSS-series locks with internal seal.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / CAM LOCK ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • GASKET FOR CAMLOCKS, BLACK NEOPRENE
    • Category
    Configurations?
    Yes
    Downloads
    2
    Added on
    2 Jul, 2013
    Name
    Title
    5/8 [16mm] Key Locking Cam Lock
    Supplier
    Description
    Material: Die Cast Zinc
    Length: 5/8
    Finish: SS Face and Plug
    Key Code: AH1
    Cam Fastener: Screw-On
    Rotation: 90 or 180 Degrees
    Description: Description

    Features:
  • Grip or Latching Distance is determined by Housing Length and Cam Offset.
  • Recommended panel cutout varies, depending on panel material.
  • Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
  • Cam Locks include two ringed keys, body nut and cam mounting screw.
  • Cams to be purchased separately.
  • If mounting on a wooden panel, we recommend a 4-prong washer.


    • Categories:
    PRODUCTS / LOCKS / CAM LOCKS / KEY-LOCKABLE

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • SS CAMLOCK-5/8-2 AH1-NO CAM-90 OR 180 DEG SCRW-HEXNUT---POLY-
    • Category
    Configurations?
    Yes
    Downloads
    10
    Added on
    2 Jul, 2013
    Verified Supplier
    All products for this supplier

    About
    SIERRA PACIFIC ENGINEERING AND PRODUCTS (SPEP) is the premier business to business supplier of engineered products and solutions. SPEP specializes in competitively priced, high quality latches, hinges, hasps, pull knobs, handles, and cam locks.

    Contact Details
    Address:
    4041 Via Oro
    Long Beach, 90810
    California, United States
    Phone: 1-800-433-5554
    Fax: 310-608-0952
    Email:
    Website: http://www.spep.com