Sierra Pacific Engineering and Products

Category:
Mounting Components
Results 1-10 of 1490
< Previous Page12345...149Next Page >
Results per page:
Name
Title
1"-8 Hex Head Cap Screw for Tilt Hinge
Description
Material: Steel
Finish: Zinc Plated
Type: Vehicular

Features:
  • bolt component for Tilt Hinge SPEP P/N H3032


  • Categories:
    PRODUCTS / HINGES / STRAP

    Catalog Page:
    View Here

  • 1"-8 HEX HEAD CAP SCREW FOR H3032, STEEL, ZINC PLATED
  • Configurations?
    No
    Downloads
    11
    Added on
    3 Jun, 2021
    Name
    Title
    Steel Tilt Hinge with Grease Fitting
    Description
    Material: Steel
    Finish: Mill
    Type: Vehicular

    Features:
  • Includes 1/4" grease fitting for easy lubrication maintenance
  • For applications on dump trailers, dump trucks or dump bodies
  • Unfinished for easy welding and painting
  • Removable hardware for ease of assembly
  • Pair of H3032 tilt hinges are suitable for use on trailers with GVWR rating up to 32,000lbs
  • (for higher rating requirements, please contact SPEP for more information)


  • Categories:
    PRODUCTS / HINGES / STRAP

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • STEEL TILT HINGE, 4.53" LONG, MILL FINISH LEAF AND BASE,ZINC PLATED HEX BOLT, LOCK NUT AND GREASE FITTING, SS WASHER
  • Configurations?
    No
    Downloads
    7
    Added on
    3 Jun, 2021
    Name
    Title
    Butt Hinge
    Description
    Material: Steel
    Finish: Mill
    Open Width: 2.01 - 3.00
    Holes: No Holes
    Pin Retention: Spun Ends

    Features:
  • Cold rolled steel butt hinges are the best combination of cost effectiveness and durability.
  • Mill finish allows for several secondary processes, including plating, painting, welding, and powder coating.
  • Equal length knuckles provide uniform strength across the entire length of the hinge.


  • Categories:
    PRODUCTS / HINGES / BUTT

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS BUTT HINGE-2.87 OPEN x 2.95 LONG-.126 THK-.267 CDS PIN-SPUN EACH END-UNEQ KN-N/HOLES-MILL FINISH
  • Configurations?
    No
    Downloads
    15
    Added on
    16 Mar, 2010
    Name
    Title
    Vehicular Strap Hinge
    Description
    Material: Stainless Steel
    Finish: Polished
    Type: Vehicular

    Features:
  • SS strap hinges do not require plating to provide superior corrosion resistance.
  • Type 302/304 stainless steel is an environmentally friendly, recyclable material.
  • Strap hinges work well with applications requiring wide or heavy doors, making them suitable for sheds, trucks, and trailers.
  • This product is patented by SPEP.
  • Offset strap hinges are ideal for gasketed sealed doors.

  • Industries:
    Trailer Parts
    Truck Parts

    Categories:
    PRODUCTS / HINGES / STRAP
    PRODUCTS / MISCELLANEOUS PRODUCTS / BOAT & MARINE HARDWARE

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • STAMPED STAINLESS STEEL FLUSH HINGE, 3.50MM THK BASE, ELECTROPOLISHED & HAND POLISHED
  • Configurations?
    No
    Downloads
    5
    Added on
    6 Jun, 2017
    Name
    Title
    Steel Continuous Hinge
    Description
    Material: Steel
    Finish: Mill
    Open Width: 1.75 - 2.25
    Length: 72.00
    Thickness: 0.074
    Pin Diameter: .250
    Pin Material: Steel
    Knuckles: 1.00
    Holes: No Holes

    Features:
  • Cold rolled steel piano hinges are the best combination of cost effectiveness and durability.
  • Mill finish allows for several secondary processes, including plating, painting, welding, and powder coating.
  • Length is measured parallel to the pin.


  • Categories:
    PRODUCTS / HINGES / CONTINUOUS

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS CONT HINGE 2.00 OPEN x 72.00 LONG .074 THK .250 CDS - 1.00 KN -
  • Configurations?
    No
    Downloads
    48
    Added on
    18 May, 2010
    Name
    Title
    Steel Continuous Hinge
    Description
    Material: Steel
    Finish: Mill
    Open Width: 1.75 - 2.25
    Length: 72.00
    Thickness: 0.074
    Pin Diameter: .187
    Pin Material: Steel
    Knuckles: .500
    Holes: No Holes

    Features:
  • Cold rolled steel piano hinges are the best combination of cost effectiveness and durability.
  • Mill finish allows for several secondary processes, including plating, painting, welding, and powder coating.
  • Surface type hinge that will lay flat in the open position.


  • Categories:
    PRODUCTS / HINGES / CONTINUOUS

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS CONT HINGE-2.00 OPEN x 72.00 LONG-.074 THK-.187 CDS PIN-.50 KN-MILL FINISH-
  • Configurations?
    No
    Downloads
    2
    Added on
    18 May, 2010
    Name
    Title
    Lift-Off Hinge
    Description
    Material: Plastic
    Finish: Black
    Orientation: Left Hand
    Type: Lift-Off

    Features:
  • Multiple styles and materials are available for a variety of applications.
  • Lift off hinges area cost effective solution for safely removing doors.
  • We recommend using Stainless Steel screws for mounting plastic lift off hinges.
  • Some hinges are available with component for non-removable configuration, such as a C-clip.

  • Industries:
    Electronic Enclosures

    Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • LIFT OFF HING WITH OFFSET, LEFT HAND, LARGE, BLACK PLASTIC, 1/4-20 THD HOLES
  • Configurations?
    No
    Downloads
    2
    Added on
    6 Jun, 2017
    Name
    Title
    Plastic Enclosure Hinge with Threaded Studs and Inserts
    Description
    Material: Plastic
    Finish: Black
    Mounting Type: Threaded Studs
    Open Width: 1.06 - 1.20
    Length: 1.90 - 3.00
    Type: Miscellaneous

    Features:
  • Plastic hinges are impervious to corrosion, making them suitable for a variety of applications.
  • Plastic hinges offer high impact strength.

  • Industries:
    Crating / Cases
    Electronic Enclosures
    Truck Parts

    Categories:
    PRODUCTS / HINGES / BUTT
    PRODUCTS / HINGES / PLASTIC HINGES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • PLASTIC ENCLOSURE HINGE, SS PIN, M5 THD, STUDS AND INSERTS, BLACK
  • Configurations?
    No
    Downloads
    0
    Added on
    6 Jun, 2017
    Name
    Title
    Loose Joint Hinge
    Description
    Material: Steel
    Finish: Mill
    Orientation: Right Hand
    Type: Loose Joint

    Features:
  • These are also referred to as Slip Joint Hinges, Take Apart Hinges or Loose Joint Hinges.
  • Some Male and Female leaves may be purchased separately.
  • Typical range of motion is 270 degrees unless otherwise specified.
  • Most of our hinges are in stock and available for immediate shipping.


  • Categories:
    PRODUCTS / HINGES / LIFT-OFF

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS TAKE APART HINGE-.719 LEAF WIDTH X 1.50 LONG-.050 THK-.120 CDS PIN-.594 LONG-.161 HOLES-MILL-RIGHT HAND MALE ONLY
  • Configurations?
    No
    Downloads
    0
    Added on
    19 Mar, 2010
    Name
    Title
    Butt Hinge
    Description
    Material: Steel
    Finish: Mill
    Open Width: 3.01 - 4.00
    Holes: No Holes
    Pin Retention: Spun Ends

    Features:
  • Cold rolled steel butt hinges are the best combination of cost effectiveness and durability.
  • Mill finish allows for several secondary processes, including plating, painting, welding, and powder coating.
  • Material thickness is typically intended to match the panel thickness of the application.


  • Categories:
    PRODUCTS / HINGES / BUTT

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CRS BUTT HINGE 4.00 OPEN x 5.000 LONG .180 THK .375 CDS SP UNEQ KN -
  • Configurations?
    No
    Downloads
    2
    Added on
    5 May, 2010

    About

    SIERRA PACIFIC ENGINEERING AND PRODUCTS (SPEP) is the premier business to business supplier of engineered products and solutions. SPEP specializes in competitively priced, high quality latches, hinges, hasps, pull knobs, handles, and cam locks.

    Contact Details

    Address:
    4041 Via Oro
    Long Beach, 90810
    CA, US
    Phone: 1-800-433-5554
    Fax: 310-608-0952
    Email:
    Website: http://www.spep.com