REV Robotics

Models inREV Robotics CatalogHardware
Results 1-10 of 15
< Previous Page12Next Page >
Results per page:
Part Number
Supplier
Description
Zinc plated steel nuts compatible with all REV M3 screws or bolts. Contains a nylon insert which increases grip on screw, reducing the chance of the nut loosening over time. Will NOT fit in the channel of our REV 15mm Extrusion System.
Category
Tags
Configurations?
No
Downloads
20
Added on
24 Dec, 2019
Part Number
Supplier
Description
Without Threads. Zinc plated steel nuts compatible with all REV M3 screws or bolts. Contains a nylon insert which increases grip on screw, reducing the chance of the nut loosening over time. Will NOT fit in the channel of our REV 15mm Extrusion System.
Category
Tags
Configurations?
No
Downloads
32
Added on
24 Dec, 2019
Part Number
Supplier
Description
Custom zinc plated steel drop-in hardware to work with the REV 15mm Extrusion System. Length measured from tip to underside of hex cap.
Category
Tags
Configurations?
No
Downloads
0
Added on
24 Dec, 2019
Part Number
Supplier
Description
Zinc plated steel hex hardware of the appropriate size to work with the REV 15mm Extrusion System. Length measured from tip to underside of hex cap.
Category
Tags
Configurations?
No
Downloads
0
Added on
24 Dec, 2019
Part Number
Supplier
Description
Without Threads. Zinc plated steel hex hardware of the appropriate size to work with the REV 15mm Extrusion System. Length measured from tip to underside of hex cap.
Category
Tags
Configurations?
No
Downloads
0
Added on
24 Dec, 2019
Part Number
Supplier
Description
Zinc plated steel hex hardware of the appropriate size to work with the REV 15mm Extrusion System. Length measured from tip to underside of hex cap.
Category
Tags
Configurations?
No
Downloads
1
Added on
24 Dec, 2019
Part Number
Supplier
Description
Without Threads. Zinc plated steel hex hardware of the appropriate size to work with the REV 15mm Extrusion System. Length measured from tip to underside of hex cap.
Category
Tags
Configurations?
No
Downloads
1
Added on
24 Dec, 2019
Part Number
Supplier
Description
The REV Robotics Shaft Collar is used to prevent gears, sprockets, wheels, and other parts from sliding out of place on a 5mm hex shaft. Shaft collars can also be used to prevent the shaft itself from sliding out of its mounts.
Category
Tags
Configurations?
No
Downloads
0
Added on
24 Dec, 2019
Part Number
Supplier
Description
The REV 1/2" UltraHex Shaft allows teams to adapt the REV 5mm Hex Shaft family of products to 0.5" Hex applications. It can also be used as a coupler to extend 5mm Hex shafts.1/2" UltraHex Shaft is also a perfect for standoff and cross bracing. The 5mm Hex hole in the center of the extrusion can be tapped to accept either 1/4-20 or M6 screws, or it can be drilled and tapped for larger diameters when tension loading is required.
Category
Tags
Configurations?
No
Downloads
0
Added on
29 Jun, 2020
Part Number
Supplier
Description
These Low Profile Nylon Lock Nuts are thin enough to fit inside the channel of the REV 1" Extrusion. The embedded nylon ring provides tight vibration resistant hold on the threads of the screw.
Category
Tags
Configurations?
No
Downloads
0
Added on
29 Jun, 2020
Category Tags

About

Robotics parts supplier dedicated to helping promote STEAM globally. Proud supplier of FIRST Global, FIRST Tech Challenge, and FIRST Robotics Competition.

Contact Details

Address:
1621 W Crosby Rd
Suite 104
Carrollton, 75006
Texas, United States
Phone: 8442552267
Email:
Website: www.revrobotics.com