Sierra Pacific Engineering and Products

Models inSierra Pacific Engineering and Products CatalogHandles
Results 221-230 of 463
< Previous Page1...2122232425...47Next Page >
Results per page:
Name
Title
Small Casted Padlockable L-Handle
Supplier
Description
Material: Stainless Steel
Finish: Polished
Type: Padlockable Casted
Shaft Style: Unthreaded
Mounting: Blind
Description: Description

Features:
  • Polished, stainless steel L-Handles with keyhole that fits a standard padlock.
  • Keyhole allows use of a standard padlock or dual lock bracket (X125 & X125-01) which enables use of 2 padlocks.
  • L-Handle has a 3.25" long with 0.313" square shaft which is non-threaded.
  • Escutcheon has a blind mount style with -20" x .50 long threaded studs on escutcheon.
  • Intended for NEMA 4, 4X, 12 and IP66 enclosure requirements when used with included gasket part no. 309G-02
  • This product is patented by SPEP.

    • Industries:
    Electronic Enclosures
    Truck Parts

    Categories:
    PRODUCTS / HANDLES / L HANDLES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • SMALL PADLOCKABLE L-HANDLE, 3.25 SHAFT, UNTHREADED, BLIND MOUNT, O RING, 304SS, POLISHED, WITH GASKET, WITH SMALL DROP OF SILVER PAINT ON KNURLED PIN
    • Category
    Configurations?
    Yes
    Downloads
    15
    Added on
    25 May, 2017
    Name
    Title
    Single Point Cam for Low Profile Quarter Turn Latch
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset In
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • SS strap hinges do not require plating to provide superior corrosion resistance.
  • Type 302/304 stainless steel is an environmentally friendly, recyclable material.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 0.39" grip for an overall 0.55" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC
    RV

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, ,.55 OFFSET IN, NO CAM STOP, FOR QUARTER TURN LATCH WITH DETENT WASHER, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    0
    Added on
    5 Jun, 2017
    Name
    Title
    Single Point Cam for Low Profile Quarter Turn Latch
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset In
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • SS strap hinges do not require plating to provide superior corrosion resistance.
  • Type 302/304 stainless steel is an environmentally friendly, recyclable material.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 0.55" grip for an overall 0.39" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC
    RV

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .39 OFFSET IN, NO CAM STOP, FOR QUARTER TURN LATCH WITH DETENT WASHER, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    2
    Added on
    5 Jun, 2017
    Name
    Title
    Single Point Cam for Low Profile Quarter Turn Latch
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • SS strap hinges do not require plating to provide superior corrosion resistance.
  • Type 302/304 stainless steel is an environmentally friendly, recyclable material.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 1.25" grip for an overall 0.31" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC
    RV

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .31 OFFSET OUT, NO CAM STOP, FOR QUARTER TURN LATCH WITH DETENT WASHER, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    1
    Added on
    5 Jun, 2017
    Name
    Title
    Single Point Cam for Low Profile Quarter Turn Latch
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • SS strap hinges do not require plating to provide superior corrosion resistance.
  • Type 302/304 stainless steel is an environmentally friendly, recyclable material.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 1.73" grip for an overall 0.79" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC
    RV

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .79 OFFSET OUT, NO CAM STOP, FOR QUARTER TURN LATCH WITH DETENT WASHER, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    1
    Added on
    5 Jun, 2017
    Name
    Title
    3-point Cam for Defeater Handles or Swing Handles
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams without a positioning stop are intended to be used with swing handles only.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Features a .315" offset out for an overall 1.10" grip range when used with 0.79" body length latches.
  • May be used with or without included rod adaptors and C-clips depending on which type of rods are desired.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / SWING HANDLES / CAM OPERATED

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • 3-POINT STEEL CAM WITH ROD ADAPTERS, .315 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    5
    Added on
    5 Jun, 2017
    Name
    Title
    3-point Cam for Defeater Handles or Swing Handles
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams without a positioning stop are intended to be used with swing handles only.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Features a .394" offset out for an overall 1.18" grip range when used with 0.79" body length latches.
  • May be used with or without included rod adaptors and C-clips depending on which type of rods are desired.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / SWING HANDLES / CAM OPERATED

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • 3-POINT STEEL CAM WITH ROD ADAPTERS, .394 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    8
    Added on
    5 Jun, 2017
    Name
    Title
    3-point Cam for Defeater Handles or Swing Handles
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams without a positioning stop are intended to be used with swing handles only.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Features a .472" offset out for an overall 1.26" grip range when used with 0.79" body length latches.
  • May be used with or without included rod adaptors and C-clips depending on which type of rods are desired.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / SWING HANDLES / CAM OPERATED

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • 3-POINT STEEL CAM WITH ROD ADAPTERS, .472 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    4
    Added on
    5 Jun, 2017
    Name
    Title
    Three Point Cam with Rod Adapters
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset In
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Features a .28 <7.0> offset in
  • May be used with or without included rod adaptors and E-clips depending on which type of rods are desired.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • 3-POINT STEEL CAM WITH ROD ADAPTERS, .28 OFFSET IN, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    0
    Added on
    5 Jun, 2017
    Name
    Title
    Three Point Cam with Rod Adapters
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset In
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Features a .55 <14.0> offset in
  • May be used with or without included rod adaptors and E-clips depending on which type of rods are desired.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • 3-POINT STEEL CAM WITH ROD ADAPTERS, .551 OFFSET IN, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    0
    Added on
    5 Jun, 2017
    Verified Supplier
    All products for this supplier

    About
    SIERRA PACIFIC ENGINEERING AND PRODUCTS (SPEP) is the premier business to business supplier of engineered products and solutions. SPEP specializes in competitively priced, high quality latches, hinges, hasps, pull knobs, handles, and cam locks.

    Contact Details
    Address:
    4041 Via Oro
    Long Beach, 90810
    California, United States
    Phone: 1-800-433-5554
    Fax: 310-608-0952
    Email:
    Website: http://www.spep.com