Sierra Pacific Engineering and Products

Models inSierra Pacific Engineering and Products CatalogHandles
Results 71-80 of 464
< Previous Page1...678910...47Next Page >
Results per page:
Name
Title
Single Point Cam for Quarter Turn Latch, Offset In
Supplier
Description
Material: Steel
Finish: Zinc Plated
Offset Type: Offset In
Description: Description

Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 0.512" grip for an overall 0.177" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .177 OFFSET IN, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    16
    Added on
    24 Sep, 2013
    Name
    Title
    Single Point Cam for Quarter Turn Latch, Offset In
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset In
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 0.630" grip for an overall 0.059" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .059 OFFSET IN, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    10
    Added on
    24 Sep, 2013
    Name
    Title
    Single Point Cam for Quarter Turn Latch, Offset Out
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 0.945" grip for an overall 0.256" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .256 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    23
    Added on
    24 Sep, 2013
    Name
    Title
    Single Point Cam for Quarter Turn Latch, Offset Out
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 0.984" grip for an overall 0.295" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .295 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    28
    Added on
    24 Sep, 2013
    Name
    Title
    Single Point Cam for Quarter Turn Latch, Offset Out
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 1.102" grip for an overall 0.413" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, .413 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    29
    Added on
    24 Sep, 2013
    Name
    Title
    Single Point Cam for Quarter Turn Latch, Offset Out
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 1.772" grip for an overall 1.083" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, 1.083 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    4
    Added on
    24 Sep, 2013
    Name
    Title
    Single Point Cam for Quarter Turn Latch, Offset Out
    Supplier
    Description
    Material: Steel
    Finish: Zinc Plated
    Offset Type: Offset Out
    Description: Description

    Features:
  • Stamped cams with a positioning stop prevents the cam from rotating more than 90.
  • Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
  • Cams have an 8mm. square punched hole and a height of 45mm.
  • Features a 1.969" grip for an overall 1.280" offset (in/out) when used with 0.69" body length latches.

    • Industries:
    Electronic Enclosures
    HVAC

    Categories:
    PRODUCTS / HANDLES / DEFEATER / CAMS FOR DEFEATER HANDLES
    PRODUCTS / LATCHES / PAWL / FIXED GRIP
    PRODUCTS / LATCHES / QUARTER TURN / QUARTER TURN ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • CAM, 1.280 OFFSET OUT, ZINC PLATED
    • Category
    Configurations?
    Yes
    Downloads
    20
    Added on
    24 Sep, 2013
    Name
    Title
    Single Point Cam for 5/16 Square Shaft
    Supplier
    Description
    Material: Die Cast Zinc
    Finish: Mill
    Description: Description

    Features:
  • Single point straight cam has a 1/4-20 thread set screw.
  • Cam fits .313" square shaft.
  • Cam is die cast zinc with a mill finish.

    • Industries:
    Electronic Enclosures

    Categories:
    PRODUCTS / HANDLES / L HANDLES / L HANDLE ACCESSORIES
    PRODUCTS / HANDLES / T HANDLES / SURFACE MOUNT T HANDLES / T HANDLE ACCESSORIES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • 1-21/32 SINGLE PT DIE CAST ZINC CAM
    • Category
    Configurations?
    Yes
    Downloads
    12
    Added on
    11 Feb, 2014
    Name
    Title
    Large Key Locking Front Mount L-Handle
    Supplier
    Description
    Material: Die Cast Zinc
    Finish: Chrome Plated
    Type: Key-lockable
    Shaft Style: Threaded
    Mounting: Front
    Description: Description

    Features:
  • Installation is easy, only requiring a round hole for the shaft collar, and kept in place using two mounting screws.
  • These handles include 3/8"-24 keps nut.
  • Locking Handles are keyed CH751, with dust shutter and two keys included per handle.
  • Clockwise or Counterclockwise rotating handles are available.
  • L-handles achieve Nema 12 and IP64 requirements when combined with 336G gasket, sold separately.
  • Handles have front-mounted escutcheon and do not include mounting screws.
  • This product is patented by SPEP.

    • Industries:
    Electronic Enclosures
    HVAC
    Home Improvement
    Truck Parts

    Categories:
    PRODUCTS / HANDLES / L HANDLES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • LARGE L-HANDLE, LOCKING, CH751, POLISHED CHROME PLATED, 2.00 C-C, 90 DEG CCW ROTATION, FRONT MOUNT, WITH 3/8-24 THD SHAFT AND KEPS NUT
    • Category
    Configurations?
    Yes
    Downloads
    20
    Added on
    8 Sep, 2015
    Name
    Title
    Large Key Locking Front Mount L-Handle
    Supplier
    Description
    Material: Die Cast Zinc
    Finish: Chrome Plated
    Type: Key-lockable
    Shaft Style: Threaded
    Mounting: Front
    Description: Description

    Features:
  • These handles include 3/8"-24 keps nut.
  • Locking Handles are keyed CH751, with dust shutter and two keys included per handle.
  • Clockwise or Counterclockwise rotating handles are available.
  • Shaft length is 4.00" but may be cut down to suit different panel thicknesses and grip requirements.
  • L-handles achieve Nema 12 and IP64 requirements when combined with 336G gasket, sold separately.
  • Handles have front-mounted escutcheon and do not include mounting screws.
  • This product is patented by SPEP.

    • Industries:
    Electronic Enclosures
    HVAC
    Home Improvement
    Truck Parts

    Categories:
    PRODUCTS / HANDLES / L HANDLES

    Catalog Page:
    View Here

    Datasheet:
    Dimensioned Drawing

  • LARGE L-HANDLE, LOCKING, CH751, POLISHED CHROME PLATED, 1.813 C-C, 90 DEG CCW ROTATION, FRONT MOUNT, WITH 3/8-24 THD SHAFT AND KEPS NUT
    • Category
    Configurations?
    Yes
    Downloads
    6
    Added on
    8 Sep, 2015
    Verified Supplier
    All products for this supplier

    About
    SIERRA PACIFIC ENGINEERING AND PRODUCTS (SPEP) is the premier business to business supplier of engineered products and solutions. SPEP specializes in competitively priced, high quality latches, hinges, hasps, pull knobs, handles, and cam locks.

    Contact Details
    Address:
    4041 Via Oro
    Long Beach, 90810
    California, United States
    Phone: 1-800-433-5554
    Fax: 310-608-0952
    Email:
    Website: http://www.spep.com