2-stage, bottom actuation for 6MM striker

• Left hand orientation, dual actuation stage
• Hardened rotary components ensure secured latching with superior vibration resistance.
• Compact profile allows concealed operation, easy fit in confined space, and minimal protrusion for best aesthetic.
• Durable construction for optimal service life.
• Generous striker engagement range accommodates minor misalignment and installation tolerances for large doors.
• Applications include: vehicle compartments, equipment access doors, hoods, lids, and toolboxes

• Right hand orientation, dual actuation stage
• Hardened rotary components ensure secured latching with superior vibration resistance.
• Compact profile allows concealed operation, easy fit in confined space, and minimal protrusion for best aesthetic.
• Durable construction for optimal service life.
• Generous striker engagement range accommodates minor misalignment and installation tolerances for large doors.
• Applications include vehicle compartments, equipment access doors, hoods, lids, and toolboxes

Nema JIC Door Stop Kit

Material: Steel
Clamp Finish: Zinc Plated
Type: Miscellaneous
Thread Size: 1/4-28
Description: Description

Features:

Steel door stops are used in a variety of industries.

All components are made from zinc plated steel.

Industries:
Electronic Enclosures

Categories:
PRODUCTS / NEMA JIC / KITS

Catalog Page:
View Here

Datasheet:
Dimensioned Drawing

STEEL DOOR STOP, ZINC PLATED

Nema JIC Panel Mounting Hardware

Material: Steel
Clamp Finish: Zinc Plated
Type: Miscellaneous

Features:

Free standing panel support assembly.

Panel support is made from yellow zinc plated steel.

Part is shipped unassembled and polybagged.

Industries:
Electronic Enclosures

Categories:
PRODUCTSNEMAJICKITS

Catalog Page:
View Here

Datasheet:
Dimensioned Drawing

FS TYPE PANEL MOUNTING HARDWARE, YELLOW ZINC PLATED

Large Print Pocket with Stronger Adhesive

Material: Plastic
Finish: Gray
Size: Large
Description: Description
Double Sided Tape: With Tape

Features:

Print pockets are made of heavy duty plastic, in ANSI 61 gray color.

Data pockets are available in two sizes, small and large.

Self-adhesive tape available on some options, have been tested for adhesion strength.

Stud mounted print pockets are available as well if using with heavier loads.

Print pockets are usually found inside of an enclosure for storing operational manuals and other documents.

Industries:
Electronic Enclosures

Categories:
PRODUCTS / NEMA JIC / PRINT POCKETS

Catalog Page:
View Here

Datasheet:
Dimensioned Drawing

LARGE PRINT POCKET, GRAY, INDIVIDUALLY POLYBAGGED (SEALED), LOGO, W/ VHB STRONGER DOUBLE-SIDED TAPE

Nema / JIC Padlock Hasp and Staple Set

Material: Steel
Finish: Mill
Description: Description
Type: Hasp and Staple

Features:

Padlock Hasps are intended to be welded to the enclosure door.

The Hasp must be aligned with the Padlock Staple 181-series for padlocking capability.

These parts can be used on both Type 4 and Type 12 enclosures.

Available in Aluminum, Steel, 304SS and 316SS to match enclosure materials.

Padlock Hasp and Padlock Staple may be purchased separately.

Industries:
Electronic Enclosures

Categories:
PRODUCTS / NEMA JIC / ACCESSORIES

Catalog Page:
View Here

Datasheet:
Dimensioned Drawing

PADLOCK HASP AND STAPLE SET, STEEL, MILL FINISH

Nema / JIC Padlock Hasp and Staple Set

Material: Aluminum
Finish: Mill
Description: Description
Type: Hasp and Staple

Features:

Padlock Hasps are intended to be welded to the enclosure door.

The Hasp must be aligned with the Padlock Staple 181-series for padlocking capability.

These parts can be used on both Type 4 and Type 12 enclosures.

Available in Aluminum, Steel, 304SS and 316SS to match enclosure materials.

Padlock Hasp and Padlock Staple may be purchased separately.

Industries:
Electronic Enclosures

Categories:
PRODUCTS / NEMA JIC / ACCESSORIES

Catalog Page:
View Here

Datasheet:
Dimensioned Drawing

PADLOCK HASP AND STAPLE SET, ALUM, MILL FINISH

Nema / JIC Padlock Hasp and Staple Set

Material: Stainless Steel
Finish: Mill
Description: Description
Type: Hasp and Staple

Features:

Padlock Hasps are intended to be welded to the enclosure door.

The Hasp must be aligned with the Padlock Staple 181-series for padlocking capability.

These parts can be used on both Type 4 and Type 12 enclosures.

Available in Aluminum, Steel, 304SS and 316SS to match enclosure materials.

Padlock Hasp and Padlock Staple may be purchased separately.

Industries:
Electronic Enclosures

Categories:
PRODUCTS / NEMA JIC / ACCESSORIES

Catalog Page:
View Here

PADLOCK HASP AND STAPLE SET, SS, MILL FINISH

Nema / JIC Padlock Hasp and Staple Set

Material: 316SS
Finish: Mill
Description: Description
Type: Hasp and Staple

Features:

Padlock Hasps are intended to be welded to the enclosure door.

The Hasp must be aligned with the Padlock Staple 181-series for padlocking capability.

These parts can be used on both Type 4 and Type 12 enclosures.

Available in Aluminum, Steel, 304SS and 316SS to match enclosure materials.

Padlock Hasp and Padlock Staple may be purchased separately.

Industries:
Electronic Enclosures

Categories:
PRODUCTS / NEMA JIC / ACCESSORIES

Catalog Page:
View Here

Datasheet:
Dimensioned Drawing

PADLOCK HASP AND STAPLE SET, 316SS, MILL FINISH