SOLIDWORKS Part Reviewer

Results 111-120 of 126
Results per page:
Name
Part Number
Description
However you say tomato, this is a fun part to review how it was built. This part has some surface features including Boundary Surface, Thicken and a Mutual Trim. It also includes a Delete Face with Fill option, a Split Line curve and a Split feature.
Configurations?
No
Downloads
110
Added on
14 Mar, 2016
Part Number
Description
This is a Sheetmetal part symmetric vertically with respect to the Right Plane. Sheetmetal features are used so that the part can be flattened out to create a flat pattern. This features distinguish that this is sheetmetal part. It specifies the bend radius, wall thickness and K factor.
Configurations?
No
Downloads
50
Added on
15 Mar, 2016
Part Number
Description
With this part you will learn how to use the Base Flange feature. This adds all Sheet Metal features and functions in one step. You are able to edit material thickness, material direction, extrude type, bend radius, bend allowance, auto relief, and the ability to use gauge tables.
Configurations?
No
Downloads
68
Added on
14 Mar, 2016
Description
The leg is revolved coincident to the origin. The 3D sketch calculates the required angle to revolve the legs and calculate the intersection between the bodies. The remaining legs do not need to be patterned at the odd angle calculated by 3D Layout Sketch - the pattern for these uses the 120° we originally expected for all of the patterned legs. The Thicken Command ensures that all edges are 90° to the main conical face to ensure that it's a proper sheet metal part
Configurations?
Yes
Downloads
41
Added on
14 Mar, 2016
Part Number
Description
This part uses sketch relations to accurately calculate the geometry for an icosahedron. Surface modeling is used to create the prismatic shape. Two different ways to Loft to a point are shown.
Configurations?
No
Downloads
160
Added on
11 Mar, 2016
Part Number
Description
This part demonstrates the use of sketch relations to calculate angles and vertices. This solution to modeling a dodecahedron is surprisingly simple and elegant. Modeling a dodecahedron looks like it should be a complicated task involving creating multiple planes and features, but it can be accomplished with just a boss extrude and a cut extrude!
Category
Tags
Configurations?
No
Downloads
124
Added on
11 Mar, 2016
Name
Part Number
Description
Create a fish model with organic surface shapes and forms. Other features in this model include a Mirror and the Knit and Thicken command..
Configurations?
No
Downloads
214
Added on
11 Mar, 2016
Part Number
Description
This part features the creation of a magazine pocket. The model is split into two bodies and is completed using the Fillet tool and then delete face. The shells are then combined back into a single body and are finished by using the fillet tool to complete the edges.
Configurations?
No
Downloads
22
Added on
11 Mar, 2016
Part Number
Description
The sketch for this shutoff cut predicts the fillets used to finish off the hole. Need to insure that the shutoff hole is large enough so these fillets don't create undercuts.
Category
Configurations?
No
Downloads
14
Added on
14 Mar, 2016
Name
Part Number
Description
This Shark Week featured model is a Shark Cage. The Weldment design tool creates the structural members from sketch segments that make up the cage. Mirror and Linear Pattern is used to duplicate the bars on the cage and build the enclosure. Floats and a hinged door are included with this shark cage design.
Configurations?
Yes
Downloads
44
Added on
14 Mar, 2016

Contact Details

Address:
175 Wyman St
Waltham, 02451
Massachusetts, United States
Phone: 781-810-5011
Email:
Website: www.solidworks.com