AVX Interconnect

Models inAVX Interconnect Catalog
Results 1-10 of 62
< Previous Page12345...7Next Page >
Results per page:
Supplier
Description
  • Multiple jumper pins to be used in linear BTB applications.
  • 1.0mm pin diameter comes in 38.15mm and 26mm length - 1.0mm pin to be used with 709296001025016
  • 0.8mm pin diameter comes in 16mm length - 0.8mm pin to be used with 709296001002016 and the 92-96-202 series
  • Category
    Configurations?
    Yes
    Downloads
    179
    Added on
    30 Oct, 2019
    Supplier
    Description
    Poke-Home wire-to-wire connectors have been proven to be very simpleand reliable over the past several years. Until today, they have beenfocused on the light industrial wire gauge ranges of 18AWG to 24AWG.The latest product has just been developed to address the heavier12AWG to 18AWG. This new 300 series of connectors employs a single,phosphor bronze contact technology with a center wire stop. Acceptingboth solid and stranded wires, pre-stripped wires can be easily insertedand then twist and pulled to be removed.
    Category
    Configurations?
    Yes
    Downloads
    28
    Added on
    30 Oct, 2019
    Supplier
    Description
    This unique battery or removable module style connector is different from most others in that it allows for the pluggable device to be swiped or connected from either direction. The spring contact offers enhanced contact deflection range over existing connectors in the market with a full 1.4mm of travel after contact engagement. This contact design allows the connector to absorb more of the plastic or housing tolerances making it more functional and reliable in real life applications.
    Category
    Configurations?
    Yes
    Downloads
    1209
    Added on
    15 Oct, 2019
    Supplier
    Description
    For more than a decade, insulation displacement contacts (IDC) and press-fit or compliant pin technology have been proven to be two of the most reliable contact systems in critical automotive systems such as: airbag, engine and transmission control units. AVX has combined these two contact technologies into a new and unique, high reliability WTB connection system to replace traditional 2-Piece solutions, offering designers a new packaging option.
    Category
    Configurations?
    Yes
    Downloads
    201
    Added on
    15 Oct, 2019
    Part Number
    Supplier
    Description
    This latest connector was developed specifically to support 18 to 22AWG solid or stranded wire terminations used in power supply, LED driver and industrial control products where PCB space is limited. This new 9296 connector offers a robust single beam contact which securely captures and retains the wire in a 23% smaller package size over previous versions.
    Category
    Configurations?
    Yes
    Downloads
    144
    Added on
    2 Nov, 2018
    Supplier
    Description
    The 9176-800 series has been developed specifically for 22-28AWG discrete wires in size critical applications. By reducing the Z axis height by 1.0mm and the overall volume by up to 50%, this new package size is an ideal choice in space constrained applications over previous IDC connectors.
    Category
    Configurations?
    Yes
    Downloads
    1210
    Added on
    2 Nov, 2018
    Supplier
    Description
    The Industrial and Solid State Lighting markets continue to look for new products which will reduce size and cost without jeopardizing performance. The new dual-beam boxed contact system from AVX surface mounts to a PCB and provides a simple and reliable wire termination without soldering of the wire. The unique contact design integrates several key features within the stamping to facilitate SMT pickup, wire guidance, high force retention and easy wire removal. Combined, these features provide all of the benefits of a full function connector, without the added cost of the insulator and labor. - This family of 4mm, 3mm, 2mm and 1.7mm closed box contacts accept either solid or stranded wires ranging from 12AWG to 28AWG with current ratings up to 20Amps. Once the contacts are soldered onto the PCB, wires need to be stripped to length (twisted if stranded) and inserted into the open end of the box contact. As the wires are pushed in, upper and lower tines guide the wire down the center of the contact deflecting the right and left contact tines until the wire reaches the wire stop. Wires can be removed by twisting the wire out and or using a small blade removal tool to help release some of the contact force.
    Configurations?
    Yes
    Downloads
    4102
    Added on
    30 Mar, 2015
    Supplier
    Description
    AVX extends their board-to-board right angle connectors with a new 2mm pitch version 9155-700, an addition to the existing versions 9155-300 with a 3mm pitch and 9155-500 with a 2.5mm pitch. The stability comes from extra SMT anchor brackets. In addition to existing versions, the new connector has two options, with or without locating bosses
    Category
    Tags
    Configurations?
    Yes
    Downloads
    636
    Added on
    12 Oct, 2017
    Supplier
    Description
    Plastic locating bosses and SMT anchor tabs maximizes the mechanical stability of the connector in harsh conditions
    Category
    Configurations?
    Yes
    Downloads
    1073
    Added on
    18 Oct, 2016
    Category
    Configurations?
    Yes
    Downloads
    282
    Added on
    18 Oct, 2016
    Catalog Tags

    About

    The Interconnect Division of AVX Corporation is a leading worldwide supplier with over 60 years of experience providing high-quality, interconnect solutions. AVX Interconnect offers a broad range of products to industries such as automotive electronics, medical devices and instrumentation, solid st...
    More...

    Contact Details

    Address:
    One AVX Boulevard
    Fountain Inn, 29644
    South Carolina, United States
    Phone: 864-967-2150
    Fax: 864-228-3473
    Email:
    Website: www.avx.com